Motorola Cm300 User Code Using The

Motorola Cm300 User Code Using The

Manual - Enter your access code using the DTMF microphone keypad and press the PTT button.

For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: index.shtml.

LED StateColor Radio Call Flashing Red Flashing Red Scan Flashing Green Call Alert Flashing Yellow Yellow Selective Call Flashing Yellow Yellow Sticky MonitorOpen Squelch Yellow.

For example, to enter the character C, press the 2 button three times.

Your dealerprogrammer can program these buttons as shortcuts to various radio features.

Check with your dealerprogrammer for a complete list of functions your radio supports.

Volume Set Toggle silent monitor operation (also turn off open Monitor squelch monitor when it has been activated).

If power-up counterclockwise until is successful, you will you hear a click and both hear the Self-Test Pass the display and LED indi- Tone ( ) and.

To respond, hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth.

Hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth.

The red LED indicator lights steady while the call is being sent.

Note: A voice activated external microphone must be connected to your radio prior to power-up of the radio in order to activate the VOX feature.

This feature is commonly used to disable radios: In case of theft.

An Emergency Alert can be programmed to: Show E and sound a tone or Show the normal display or Activate the microphone so that all activity can be transmitted (for a predetermined amount of time).

Scan lists are assigned per channel, by your dealer programmer.

Your radio automatically switches to a channel, within that scan list, when it detects activity.

If a channel continually generates unwanted calls or noise (a nuisance channel), you can temporarily remove it from the scan list: While the radio is on the Nuisance Channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone.

ADD OR DELETE CHANNELS IN A SCAN LIST to select a channel that contains a Scan list you want to edit.

You can do this by prioritizing them: Priority Channel Scanning Sequence None specified Ch1 Ch2 Ch3 Ch4 Ch1 Channel 2 Ch2 Ch1 Ch2 Ch3 (Priority 1).

You can edit the phone list through your radios menu (see page 36).

Delayed Auto your radio will transmit the access code upon a PTT button press.

Motorola Cm300 User Manual